Metal Printing & Packaging has been a technology which holds 100% recyclability till date and is used more and more because of environmental concerns raised over the years over plastic packaging usage.
The quality and end result of the packaging product depends on the consideration of a few yet extremely important factors mentioned below:
Electrolytic Tin Plate is the primary Raw Material used, Intercan is an impoter and has in its vendors multiple regions from ETP is sourced including Denmark, Germany, Brazil, Argentina, Taiwan & China.
We make use of international spec 2.8/2.8 coating
Gauge & Temper are internationally recognized standards that Intercan follows with strict compliance to ensure consistency, conformity, and product reliability. Precise control over material thickness and hardness enables standardized production, superior quality, and dependable performance across all metal packaging solutions.
Intercan has always relied on German & British machinery including our 2-color printing line Crabtree with varnish & lacquering ancillary machines. Our Sudronic Seam-welding machines are state of the art machinery coupled with german seamers.
Standardized ETP with a steady guage and temper forms the basis of a perfect LID & Ring, since these fabricated using power and hydraulic presses and the female and male dyes are meant for a specific guage & temper. The fabrication of Lid & Ring becomes paramount to forming a sealed metal can.
Intercan began with a vision of being solutions providers and with our eyes set on providing quality services, Intercan proudly makes its mark as one of the leading quality product suppliers with minimum leakage levels, down to a 0.02% leakage rate.
From Our Chief Executive to our Production Supervisor, our team are experts in metallurgy and printing precision. Line Supervisors are in-house trained and most of our production floor line supervisors have been with Intercan for 20+ years.
New Entrants go through on-job training and are cycled through all of the separate floor work areas so that expertise can be identified and further honed with our in-house training manual.
Intercan provides a comprehensive product range, catering to various industries with precision. Our offerings include can sizes ranging from 125ml 55mm inner dia cans to 20-litre 277mm inner dia drums.
Our expertise extends to an array of products such as seed cans, baby milk powder cans, food cans, chemicals, paints, pesticides & lubricants.
The entire product line write-up from the brochure will be copied here. Exact line to line.
We offer a complete range of food cans in various sizes, ensuring hygienic packaging and germ-free processing. Our cans are equipped with both outside printing and inner food-grade lacquering, making them suitable for a wide
range of products such as processed food, vegetables, pulp, fruits, desi ghee, and other edibles. For the export market, we source high-quality food-grade lacquers from renowned suppliers, allowing us to consistently meet our
clients’ demand for export-quality food cans.
| 99MM | Desi Ghee 1Kg | 120 | +- /5 | gram |
| 99MM | Desi Ghee 1/2 Kg | 80 | +- /5 | gram |
| 99MM | Tomato Puree Can 800 gram | 90 | +- /5 | gram |
| 173MM | Sweet Can 1Kg | 175 | +- /10 | gram |
| 265MM | Sweet Can 2Kg | 350 | +- /10 | gram |
| 277MM | Deshi Ghee 20Kg | 350 | +- /10 | gram |
Agriculture is Pakistan’s backbone and a highly sought-after industry
worldwide. We cater to the pesticide, insecticide, and seed can
market, providing EOE and sealed Lid options to meet agriculture
product demands. Our cans come with varnish, food-grade lacquer,
and plain inner can options for maximum versatility.
| 65MM | Seeds can 200 gram with EOE | 60 | +-/5 | gram |
| 65MM | Seeds can 500 gram with EOE | 85 | +-/5 | gram |
| 83MM | Seeds can 200 gram with EOE | 45 | +-/5 | gram |
| 99MM | Seeds can 1Kg with EOE | 110 | +-/5 | gram |
One of our top-performing product lines is focused on general paint
solutions, encompassing enamels and emulsions with lacquered inners.
These premium enamels are essential for construction, maintenance,
and industrial applications. At Intercan, we take pride in offering a diverse
selection, ranging from 250ml cans to 20-liter drum sizes, complete with
an array of lid options, including cushion ring and slip lid choices. Our
commitment to excellence ensures that our paint packaging solutions
meet the highest standards of quality and functionality.
| 165MM | Paint can 4Ltr (Cushion Ring) | 350 | +-/10 | gram |
| 165MM | Paint can 3Ltr (Cushion Ring) | 290 | +-/10 | gram |
| 172MM | Paint can 3.64 Ltr (Saftey Ring) | 330 | +-/10 | gram |
| 172MM | Paint can 4 Ltr (Saftey Ring) | 350 | +-/10 | gram |
| 172MM | Paint can 3.64 Ltr (Saftey Ring With Close Seal) | 350 | +-/10 | gram |
| 172MM | Paint can 3.64 Ltr (Double Ring) | 350 | +-/10 | gram |
| 172MM | Hardner Can 5Kg (Double Ring ) | 500 | +-/10 | gram |
| 105MM | Paint can 1 Ltr (Cushion Ring) | 135 | +-/5 | gram |
| 105MM | Auto Paint 0.91 Ltr( Cushion Ring) | 150 | +-/5 | gram |
| 112MM | Paint can 0.91Ltr (Double Ring) | 145 | +-/5 | gram |
| 112MM | Paint can 0.91Ltr (Saftey Ring ) | 135 | +-/5 | gram |
| 112MM | Paint can 0.91Ltr (Saftey Ring with Close seal) | 145 | +-/5 | gram |
| 277MM | Paint 16Ltr/18Ltr/20Ltr | 1350 | +-/50 | gram |
The viscosity of thinners poses packaging challenges, especially
considering the highly corrosive nature of the key component, MEK
(Methyl Ethyl Ketone). Ensuring proper handling and maintaining quality
conformity are vital for the safety of this hazardous liquid. At Intercan, we
have achieved product quality superiority in this sensitive packaging
segment by implementing processes that guarantee strict conformity.
| 112x60MM | Thinner can 500Ml with 32MM Plastic Sppout | 105 | +-/5 | gram |
| 112x60MM | Thinner can 1Ltr with 32MM Plastic Sppout | 145 | +-/5 | gram |
| 112x60MM | Thinner varnish 750Ml | 120 | +-/5 | gram |
| 110x163MM | Thinner can 3Ltr with 32MM Plastic Sppout | 290 | +-/10 | gram |
| 110x163MM | Thinner can 3.64Ltr with 32MM Plastic Sppout | 350 | +-/10 | gram |
| 110x163MM | Thinner can 4Ltr with 32MM Plastic Sppout | 340 | +-/10 | gram |
| 110x163MM | Thinner can 3.64Ltr with Drawn Neck | 350 | +-/10 | gram |
As a proud supplier in the automotive paint industry, we offer a diverse
range of re-finish and OEM paints for automobiles. Our
comprehensive selection includes car paints, varnishes, clearcoats,
and hardeners, available in various sizes and shapes to cater to
different needs. Designed to meet the demands of automotive
professionals and enthusiasts, our cans deliver exceptional results for
touch-ups or full-scale painting projects.
| 120MM | CarWax | 110 | +-/5 | gram |
| 137MM | Ink Can 1Kg | 140 | +-/5 | gram |
| 110MM | Ink Can 0.5Kg | 85 | +-/5 | gram |
| 137MM | Putty can 1Kg with Normal Ring | 100 | +-/5 | gram |
| 153MM | Putty can 1Kg with slip Lid | 125 | +-/5 | gram |
Drums Size Certain customers demand sizes which are apart from the general line of round or oblong shapes. The requirement
is to fulfill sizes of 14 liters to 20 liters. Mostly consumed under Industrial lines and/or bulk filling, we supply a
number of lid options in the drummy sizes as well.
Lubricant Line The packaging of mobile lubricants in metal containers is regarded as one of the most distinctive brand packaging
approaches, driven by the belief in the limitless potential of recyclable metals. Our company specializes in
providing a diverse range of packaging solutions tailored to the lubricant industry, serving both domestic and
international markets.
| 60MM | Break Oil | 80 | +-/5 | gram |
| 110x163MM | Mobile Oil 3Ltr with Pullout Sppout | 360 | +-/10 | gram |
| 110x163MM | Mobile Oil 4Ltr with Pullout Sppout | 300 | +-/10 | gram |
| 83MM | Mobile Oil 0.7L with Eoe | 95 | +-/5 | gram |
| 99MM | Mobile Oil 1L with Eoe | 120 | +-/5 | gram |
Since COVID, there has been a growing interest in specialty cans of
different shapes and sizes to cater towards a niche market of candles,
bidh boxes, jewelry, candies, wearables, perfume packaging, clothing
etc. We are working towards introducing more product lines to ease
our startup clients in this segment also.
Infant baby milk powder is a critical juncture. Intercan has been successfully able to process with precision and utmost international standards compliance.
These are offered in standard 99mm size, with options of Aluminium seals and/or Easy Open Ends with Plastic Caps.
Imported Printing Inks and Inner Food Can Lacquering is a must, and there is no compromise on this matter.
As the sole vendors to the largest greasing company of Pakistan, we have created a robust system, which has delivered par quality to clients ranging from local players in the south to approved vendors of the directorate general defence purchases.
Available in multiple sizes and dimensions.
We are a leading metal printing and packaging company specializing in precision engineered packaging solutions.
Subscribe to receive packaging insights, industry updates, and the latest news from Intercan.
Copyright © 2026 All Rights Reserved.
